Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Alvin
Most standard chimney sweeps in Alvin run between $189 and $319, depending on what’s inside the flue and how long it’s been since the last cleaning. If you’re in Alvin and haven’t had the fireplace looked at in a couple of years, that’s the honest range to expect. We dispatch crews into Alvin throughout the week, and a live person answers the phone at (254) 978-7413 any hour, any day. Our Chimney Sweep team knows exactly what Alvin’s salt air does to a chimney because we’ve pulled apart enough of them here to see it.
We’re not a call center that sends whoever’s available. We’re Kindling Chimney Houston, and the crews who come to Alvin are background-checked, uniformed, and trained on the C.A.R.E. values: shoe covers and drop cloths go down before anything else, nothing gets moved without asking, and a photo of the clean-up is taken before the truck leaves. That matters when you have kids crawling on the hearth rug and a dog who investigates every stranger.
Why Kindling Chimney Houston Is Alvin’s Preferred Chimney Sweep Company
Alvin sits close enough to the Gulf that the air itself does work on your chimney all year, even when you never light a fire. Galvanized caps corrode in five to seven years here where the same part might last two decades inland. Flashing pulls away from brick after enough humid summers and the occasional freeze-thaw cycle. We know this because we’ve replaced enough corroded caps and re-flashed enough Alvin chimneys to recognize the pattern the moment we get on the roof.
Danny Cortes leads our crews, and he’s particular about two things: telling you the truth about what your chimney needs and leaving your house the way we found it. That’s why every visit starts with a written price before any work begins. Not an estimate you have to decode. A number on paper, in your hand, before a tool comes off the truck. Families in Alvin tell us that’s the main reason they don’t dread chimney maintenance the way they used to.
We’ve swept chimneys in older ranch-style homes near Gordon Street where the original dampers were corroded nearly shut, and in newer subdivisions off Highway 6 where the problem was creosote glaze from compressed sawdust logs. Different houses, same Gulf Coast air. Our Alvin customers tend to be generous with their referrals because the process is predictable: set price, clean work, photographic proof of the job.
Every sweep is backed by the 365-Day Done Right Promise. If something wasn’t right, we come back and make it right. No fine print, no runaround. That’s the whole promise.
Styles & brands we work with





Chimney Cleaning in Alvin
Chimney Cleaning in Alvin means removing creosote, soot, and whatever else has built up inside the flue since the last burn season, using brushes sized to your exact flue dimensions. A standard sweep here runs $189 – $319, with the higher end common when third-degree creosote glaze has hardened over Alvin’s long, hot idle season and requires mechanical removal. You know it’s time when you smell a campfire-like odor inside the house on humid days, or when you can scrape a quarter-inch of black crust off the damper with a butter knife.
Creosote and Soot Removal
Alvin’s burn season is short and intermittent, which sounds nice but creates a specific problem. Creosote from uncured wood or compressed sawdust logs sits in the flue through months of heat and humidity, baking into a hard, shiny glaze. Standard brushing won’t touch it. We use rotary loop tools and chemical treatments when the glaze is too thick, and we’ll be honest about which level of cleaning you actually need before we start.
Annual Sweep
Even if you burn only a handful of fires each winter, an annual sweep catches the things you can’t see from the hearth. In Alvin, that means checking for water streaks from failed flashing, rust staining from a deteriorating cap, and the early signs of brick spalling on the crown. The sweep itself is the main job; the inspection that comes with it is what keeps small leaks from turning into a soaked firebox and a seized damper.
Fireplace Cleaning in Alvin
Fireplace Cleaning in Alvin goes beyond the flue and into the firebox, the smoke chamber, and the damper assembly, removing ash, soot, and the fine black dust that finds its way onto mantels and hearth rugs. It’s included as part of a standard chimney sweep and typically runs $189 – $319 here depending on how much accumulation has settled since the last cleaning. Homeowners with pets and young kids usually want this done before the first real cold snap, so the whole room is ready before the fireplace gets used in earnest.
Firebox and Smoke Chamber
In coastal air like Alvin’s, a dirty firebox isn’t just about appearance. Ash absorbs humidity and holds it against the firebrick, accelerating deterioration in older masonry. We vacuum the firebox, brush the smoke chamber, and check for gaps where smoke could escape into the house. Drop cloths go down before the vacuum comes out, and the ash goes out with us, never into your trash can.
Pet-Safe and Kid-Aware Cleaning
Where there’s a choice between products, we use pet-safe options. That’s part of the Cedarwell Care Promise. Tools are quiet enough that a napping toddler won’t wake up every time we move the ladder. And before we leave, we photograph the cleaned hearth and surrounding floor so you can see exactly what we did, even in the corners.
Trusted Brands We Service in Alvin
When we install a new cap, damper, flashing, or liner component in Alvin, we use materials built for coastal exposure. DuraFlex stainless liners and Olympia Chimney caps hold up against salt air far better than galvanized alternatives, which is why we stock them for Alvin jobs specifically. HeatShield is our go-to for repairing damaged clay tile liners in older brick chimneys where full replacement isn’t necessary. We keep common Alvin sizes and components on the truck, which means a corroded cap or failed damper can often be replaced the same day without waiting on a special order.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Alvin Homes
- Rusted-out galvanized caps and flashing. Salt air from the Gulf eats through galvanized components in five to seven years here. We routinely replace them with stainless steel, which is the only material that holds up for the long haul this close to the coast.
- Third-degree creosote glaze. Compressed sawdust logs and uncured wood produce heavy creosote that bakes into a hard, shiny layer during Alvin’s long hot summers. Standard brushes won’t remove it, and it requires mechanical removal to eliminate the fire hazard.
- Spalled brick and crumbling mortar. Mid-century ranch homes throughout Alvin have brick chimneys that absorb coastal humidity and then crack during the occasional freeze. By the time you see brick chips in the yard, water has usually been working its way in for a while.
- Water intrusion through the crown and flashing. Heavy spring rains find every weak point. We inspect crowns and flashing on every sweep because a leak discovered in April is far cheaper than a firebox rebuild discovered in November.
Pricing for Chimney Sweep in Alvin, TX
A standard chimney sweep in Alvin runs $189 – $319. Where you land in that range depends on how long it’s been since the last sweep, whether glazed creosote requires mechanical removal, and what condition the cap, flashing, and damper are in. A Level 1 inspection is included with every sweep. A Level 2 inspection with a camera runs $349 – $549 and is what we recommend after a water leak, a chimney fire, or before buying a home in Alvin. Nothing gets recommended unless we can show you the camera footage. If the issue is minor and can wait, we’ll say so plainly. Call (254) 978-7413 for an exact quote before we even book the visit. Estimates are free and come in writing.
We Also Serve Cities Near Alvin
Our crews cover Alvin and the surrounding communities, including Manvel, Pearland, Santa Fe, and League City. If you’re just outside Alvin, call us and we’ll let you know when we’re in your area next. Scheduling is coordinated from our Houston office, but the crew that shows up is a local one that knows these neighborhoods.
Serving Alvin, TX - Our Local Coverage Area
We’re based in the Alvin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Alvin
Once a year is enough for most Alvin homes, even with light use. The issue isn’t just the volume of creosote, it’s what happens to it during all those months the fireplace sits idle. Creosote hardens in humid heat and becomes harder to remove the longer it sits. An annual sweep keeps the flue in condition that can be cleaned with standard brushing, which keeps the cost at the lower end of the $189 – $319 range. If you’ve skipped a few years, the first visit back will likely cost more because of glaze removal. Call (254) 978-7413 to schedule before burning season and we’ll get you on the calendar.
Because salt air is relentless. Galvanized steel is coated in zinc, and zinc corrodes quickly in coastal atmospheres. In Alvin, a galvanized cap or flashing commonly fails in five to seven years, where the same part inland might last fifteen or twenty. Last fall our crew pulled a corroded galvanized cap off a brick chimney in the Southwood subdivision. The salt air had eaten through the mesh and let rain pour straight down the flue. The firebox was soaked, the damper seized, and the clay tile liner was spalling from repeated wetting. We installed a stainless steel cap and top-sealing damper, then did a Level 2 inspection with a camera to confirm the liner was still sound. If you’re replacing a cap in Alvin, stainless is the only choice worth making.
We can usually remove third-degree creosote with mechanical tools; relining is a separate decision based on the condition of the liner itself. Rotary loop tools and chemical treatments break down hardened glaze without damaging the flue. After removal, we run a camera through the flue to check whether the liner has cracks, gaps, or spalling. If the liner is compromised, a stainless steel reline with DuraFlex is the fix, but we’ll show you the footage before recommending anything. The creosote itself is a cleaning problem, not a replacement issue. Schedule a sweep and inspection at (254) 978-7413 to find out which situation you’re dealing with.
In Alvin, the most likely causes are failed flashing around the chimney or a cracked crown, both of which get worse with coastal humidity and heavy spring rain. When flashing pulls away from brick, water runs down the outside of the chimney and follows the framing into the ceiling near the fireplace. A cracked crown lets water soak directly into the masonry. Either way, the fix starts with a Level 2 inspection to locate the entry point, followed by repair of the flashing or crown. The sooner it’s addressed, the less damage the water does to framing and drywall.
Yes, and it’s one of the more common repairs we do in older Alvin neighborhoods. Homes built decades ago often have dampers that were corroded nearly shut by salt air, or never had a proper damper installed at all. We install top-sealing dampers at the crown, which mount to the top of the flue and seal with a gasket when closed. They keep conditioned air in, rainwater out, and they don’t require removing the existing damper assembly down in the firebox. The repair is done from the roof, takes a few hours, and includes the same written price and clean-up guarantee as every other job we do.
Written by Danny Cortes, Owner at Kindling Chimney Houston, serving Alvin and surrounding communities. Part of the Cedarwell family of companies, established 2003.