Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Alvin, TX
A chimney cleaning in Alvin, TX typically costs between $189 and $289 for a standard sweep, depending on the level of creosote buildup and how long the fireplace has sat unused. Alvin’s hot, humid summers and mild winters mean most fireplaces sit dormant for seven or eight months a year, which changes how chimneys here need to be maintained. If you’re noticing a smokey smell when you open the damper or a film of dark soot around your hearth, call us at (254) 978-7413 and we’ll walk you through what’s normal for a Gulf Coast chimney and what isn’t.
We’re Kindling Chimney Sweep, part of the Cedarwell family of companies established in 2003, and our Alvin crews work under Danny Cortes. Every job starts with a written price before any work begins, follows our C.A.R.E. values on site, and carries the 365-Day Done Right Promise. No pressure, no mystery line items, and a photo of the clean-up before we leave.
Why Alvin Homes Are Different
Alvin sits close enough to Galveston Bay that the air carries salt and heavy humidity most of the year, and that single fact shapes more of our work than anything else. Homes in older Alvin neighborhoods like Wedgewood, Mustang Crossing, and the blocks around Gordon Street were built largely in the 1960s through the 1980s, and many of those original brick chimneys were put up with metal dampers that have since corroded in the coastal air. When a damper rusts through or the flue lining absorbs moisture during a wet spring, water works its way into the masonry, and you get the spalling brick faces and flaking mortar we regularly see on Alvin inspections.
Alvin’s housing stock is a mix: solid mid-century ranch homes with brick-clad chimneys alongside newer suburban construction that uses manufactured fireplaces and prefab flue systems. The older masonry chimneys absorb Gulf moisture even when the fireplace never gets lit, which means deterioration doesn’t pause during the off-season. Add in the fact that many Alvin families burn compressed sawdust logs or wood that hasn’t fully cured, and you get a dense, tar-like creosote that hardens into a glaze over a long, hot summer. That’s the kind of buildup a standard wire brush won’t remove, and it’s one of the reasons a professional chimney sweep in Alvin takes a different approach than it would further inland.
Styles & brands we work with
Our Main Alvin Services
Most Alvin homeowners call us about one of three things: creosote buildup from seasonal burning, a fireplace that’s starting to show signs of moisture damage, or a chimney they haven’t had inspected since buying the home. Each service has its own Alvin page with full pricing and what to expect.
Chimney Sweep in Alvin
A chimney sweep in Alvin almost always involves more than just brushing out loose soot. Because the climate creates hard, glazed creosote over the summer months, our technicians often need to use mechanical rotary tools rather than a standard wire brush. We protect the room before anything starts – drop cloths down, shoe covers on, and nothing moved without asking – and we use pet-safe products where there is a choice, which matters in homes where dogs and kids are underfoot. Chimney Sweep in Alvin.
Chimney Inspection in Alvin
Inspections in Alvin are particularly useful because the off-season is when the damage happens. Moisture gets into the masonry while the fireplace sits cold, and a video inspection can show you exactly where the liner has cracked or the flashing has failed before you ever light a fire. Every inspection comes with camera evidence and a photo report, so you’re never asked to take a repair recommendation on faith. Chimney Inspection in Alvin.
Fireplace Repair in Alvin
Repairs here tend to split into two categories: correcting moisture damage (rusted dampers, spalled brick, failed flashing) and replacing liner systems in older homes. We work with DuraFlex and HeatShield systems for liner repairs, and we stock common parts locally so most Alvin repairs don’t require waiting on a long out-of-state shipment. Fireplace Repair in Alvin.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alvin
We work on and install the brands most common in Alvin homes, including DuraFlex chimney liners, HeatShield resurfacing systems, Gelco chimney caps, and Olympia Chimney products. When a part is needed, we stock the common ones locally and can usually source the rest within a few days, so repairs don’t stretch on. Visit our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Alvin, TX
| Service | Typical range in Alvin |
|---|---|
| Standard chimney sweep (Level 1) | $189 – $289 |
| Heavy creosote / glazed removal | $289 – $439 |
| Chimney cap installation | $150 – $350 |
| Standard chimney inspection | $99 – $249 |
| Damper replacement | $220 – $475 |
| Chimney crown repair | $350 – $700 |
| Flashing repair | $250 – $550 |
| Chimney liner installation | $1,800 – $4,500 |
| Fireplace smoke issues / draft problems | $150 – $400 |
In Alvin, prices tend to climb when humidity has already compromised the mortar or flashing, since that work often has to be addressed before a sweep can do its job safely. Glazed creosote also adds labor, because rotary cleaning takes longer than a standard brushing. Every job, regardless of what it ends up needing, starts with a written price before any work begins, so you’ll always know the number before we touch anything.
Neighborhoods We Serve in Alvin
We work throughout Alvin and the surrounding Brazoria County areas, and since our crews are dispatched locally, scheduling in Alvin is straightforward. You’ll see us in:
- Wedgewood
- Mustang Crossing
- Gordon Street area
- Downtown Alvin
- Kendall Lakes
Most Alvin appointments are booked within the same week, and we’ll give you a firm arrival window when you call.
Service Area – Cities Near Alvin
In addition to Alvin, we serve several nearby communities where families face the same humid Gulf Coast conditions: Manvel, TX, Pearland, TX, Santa Fe, TX, and League City, TX. If you’re just across the city line in one of these areas, call us and we’ll confirm your address is in our service footprint.
Serving Alvin, TX - Our Local Coverage Area
We’re based in the Alvin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Alvin
Most Alvin appointments are scheduled within the same week, and since crews serving Alvin are dispatched locally, you won’t wait on a team coming from across the metro. Call (254) 978-7413 and a live person will give you the next available slots while you’re on the phone.
No, routine sweeping and inspections don’t require a permit in Alvin. Repairs that change the structure of the chimney, like a full liner replacement or crown rebuild, may need a permit depending on the scope, and we’ll tell you before any work is scheduled whether that applies to your job.
Yes. We offer appointment windows that work for people with jobs and school schedules, including some weekend availability. When you call, we’ll find a window that works for your household rather than asking you to rearrange your week around us.
If you have a fireplace in Alvin that hasn’t been checked in a few seasons, call (254) 978-7413 for a free estimate. We’ll give you a written price before any work starts, protect your floors and furniture while we’re there, and send you a photo of the clean-up before we leave. That’s the standard, for every job, every time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alvin Customers Say
"We have a toddler and a cat and the tech was great about keeping doors closed and not leaving tools out. Cleaned the fireplace spotless and left a photo of the finished flue."
- Perry Osei"Smoke was coming back into the room. He found a blockage, cleared it, and cleaned up so well you'd never know he was here. Kind and patient explaining it all to me."
- Caitlin Mercer"First sweep since we bought the house. He put down a drop cloth and used a vacuum so there wasn't a speck of soot anywhere, which with light carpet I was dreading. Showed me the flue on camera."
- Lorraine Petty